Page 5
DMS-OUT Owner’s Manual
Network LED
●
Off
Unit is not connected to the local area network and cannot send/receive data.
●
Blinking Green
Unit is connected to the local network, but has not received an IP address.
●
Green
Unit is connected to the local network and has an IP address.
Bottom Panel
Located beneath the DMS-OUT is a Reset button. The Reset button is recessed so a
paperclip or something similar is required to press. This button allows for:
●
Rebooting the DMS-OUT
A momentary press of the Reset button reboots the DMS-OUT, similar to
unplugging it from the power supply.
●
Factory Default
Pressing and holding the Reset button for ten (10) seconds or longer, factory
resets the DMS-OUT to its factory state. The DMS-OUT requires re-programming
after this has been performed.
