asseMbly instructions:
(RideRs 60-110 Kgs)
Prior to assembling your
PRo Pogo 60110
, check that the Pogo
has arrived to you in good condition, even if the box has a few scars
and dents the contents should include:
•
1x Pro Pogo body
•
1x Handle bar assembly
•
1x foot peg set (2x pcs)
•
2x allen keys
•
4x allen bolts for foot pegs
asseMbly
step 1:
Remove the 4x allen bolts holding the handle bar grip plate
in place using the allen key supplied
(image 1)
step 2:
Place the handle bar assembly centrally in the cover groove,
replace the handle bar grip plate and the 4x allen bolts, adjust for
position
(image 2)
and then tighten.
step 3:
Placing the Pogo body on a flat surface, position the foot
pegs at the base of the pogo body with the foot grips facing upwards
(image 3)
. Using the 4x allen bolts supplied loosely tighten into
place. Before finally tightening these bolts, look down the length of
the pogo from the top and check that the foot pegs are in line with
the handle bars. When in the correct orientation tighten down the
4x allen bolts to hold the foot pegs in place.
step 4:
Make a final check of all the bolts ensuring they are tight
prior to use.
You are now ready to go.
General Maintenance
Your Pro Pogo is a sealed unit and does
not require any additional lubrication
or maintenance during the life of the
product. You should always carry out a
safety check prior to use, being sure that
all bolts are correctly tightened and the
Pogo body, handle bars and foot pegs are
in good condition and not damaged in
any way.
Always keep your Pro Pogo free from grit
and dirt by wiping your Pro Pogo down
after use with a soft cloth.
4x allen bolts
Foot grips
Handle bar grip plate
Body
4x allen bolts
iMaGe 1
iMaGe 3
Foot pegs
warranty
The manufacturer warranties this Pro Pogo model to be free from
manufacturing defects for a period of 6 months from the date of
purchase.
This limited warranty does not cover normal wear and tear, or
inappropriate use or abuse.
This limited warranty is void if:
• Used in any manner other than for recreational use.
• Modified in any way
• Rented or hired
The manufacturer is not liable for incidental or consequential loss or
damage due directly or indirectly by the use of this product.
This limited warranty does not affect your statutory consumer rights
need HelP
Contact us on
www.urbansPortsjunKie.co.uK
URBAN SPORTS
JUNKIE
© Urban Sports Junkie 2011
URBAN SPORTS
JUNKIE
URBAN SPORTS
JUNKIE
© Urban Sports Junkie 2011
Handle bar assembly
adjust for position
iMaGe 2
