Attach base to the
two stand arms by
screwing in two
small metal screws
into the circular
slots at one end of
the stand arm.
Then attach the
top light panel
with one plastic
knob screw in each
stand arm.
3. LIGHTS
2. BASIN
1. FRAME
Attach the plastic knob screws
wherever you would like along the
stand arms to adjust the height of
the light panel.
Place GREEN basin
into WHITE basin,
making sure that
the water level
indicator on the
green basin is on
the same side as
the control panel
on the white basin.
Connect BLACK
cord from the Left
hole in the light
panel to a power
socket.
Connect the
WHITE cord from
the Right hole in
the light panel to
the INPUT socket
in the base’s
control panel.
Add approximately
6.5L of water
according to water
level indicator.
WARNING!
Keep water away
from input/output
control panel.
Don’t add nutrients
for the first week.
Once sprouted add
nutrients to water.
1
2
3
4
5
1
2
