Assembly Instructions
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1 of 5
NYLA DESK
HARDWARE LIST
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips Head Screw Driver
PARTS INCLUDED
(2)
Small allen bolt
M6 x 25mm
Quantity: 7pcs
(3)
Cross nut
Quantity: 6pcs
(A) Side frame
Quantity: 2pc
(6)
Allen key small
Quantity: 1pcs
(1) Large allen bolt
M6 x 65mm
Quantity: 6pcs
(B) Front Support
Quantity: 4pc
(C) Back support
Quantity: 2pc
(D)
Shelf
Quantity: 1pc
(E) Glass Top
Quantity: 1pc
(7)
Allen key large
Quantity: 1pcs
(4) Dowel
M8 x 30mm
Quantity: 4pcs
(5)
Table top pin
Quantity: 4pcs