Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
1of5
Tools Required:
Flathead screwdriver, Phillips screwdriver, pliers, wire
cutters, wire
strippers, electrical tape, safety glasses.
Bulb Recommended:
(1) Medium Base 100W Maximum
Estimated Assembly Time:
20-30 minutes
Preparation:
Identify and
inspect all parts before beginning installation. Check package
content list and diagrams below to be sure all parts are present. If any parts are missing
or damaged, do not attempt to assemble, install, or operate
the fixture. Contact customer
service
for replacement parts.
Part
Description
Quantity
A
Crossbar
1 pc.
2 pcs.
2 pcs.
2 pcs.
B
C
D
E
F
Hex Nut
Lock Washer
Package Contents
A
B
C
D
E
Mounting Screw
F
1 pc.
2 pcs.
Lock Ball
Fixture Body
G
Shade
1 pc.
G
Installation Instructions:
UQL
1091
www.urbanambiance.com
