Warnings and Cautions
1of2
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Tools
Required:
Flathead
screwdriver,
Phillips
screwdriver,
pliers,
wire
cutters,
wire
strippers,
electrical
tape,
safety
glasses.
Light
Source:
(1) A21
Medium
Base
bulb
150W
Maximum
or
(1)
Medium
Base
Vintage
bulb
is
recommended
but
not
supplied.
Estimated
Assembly
Time:
20-30
minutes
Preparation:
Identify
and
inspect
all
parts
before
beginning
installation.
Check
package
content
list
and
diagrams
below
to
be
sure
all
parts
are
present.
If
any
parts
are
missing
or
damaged,
do
not
attempt
to
assemble,
install,
or
operate
the
fixture.
Contact
customer
service
for
replacement
parts.
Fixture
can
only
be
mounted
in
the
direction
indicated
on
page
2.
Package Contents
B
Lock
Screw
x 2
Inner Backplate
x 1
STEP 1
Install Inner Backplate and
Fixture Body
-
A. Pass the supply wires through Inner
Backplate (A). Attach Inner
Backplate (A) to Outlet Box with the
head of Green Ground Screw facing
you. Secure it with Outlet Box Screws
(not included). Tighten until snug
B. Refer to Step 2 for wiring
connections.
C. Attach Fixture Body (D) over Inner
Backplate (A) and secure with Lock
Screws (B). Tighten until snug with
screwdrivers.
.
A
Fixture Body
x 1
White wire
from supply
White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 2
D
Figure 1
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires between Inner Backplate (A) and
Fixture Body (D).
C
Lock Ball
x 2
Glass
x 1
E
Cage
x 1
F
B
Outlet Box
A
Outlet Box
Screw
D
STEP 3 - Install Bulb, Shade
and Cage
A. Insert bulb into socket and
screw snugly into place.
B. Thread the Shade (E) onto
the Fixture Hood of Fixture
Body (D). Hand tighten
until sung.
C. Pass Bolts on the top end
of the Cage (F) through
holes on the Fixture Hood
of Fixture Body (D). Secure
by threading Lock Balls (C)
onto Bolts. Hand tighten
until sung.
Figure 3
C
E
F
Socket
Fixture
Hood
Figure 4
STEP 4
-
Apply Silicone
Sealer
A. Make sure exterior wall
surface and fixture
backplate are free of dirt
before applying caulk.
Using exterior grade caulk,
caulk over top of backplate
and down other side. Do
not caulk bottom of fixture
backplate to ensure proper
moisture drainage.
Your fixture is now
assembled and ready to
use. Enjoy!
Exterior
Grade
Caulk
Backplate
Vintage Bulb
(recommended
but not supplied)
Installation Instructions:
UQL
100
2
www.urbanambiance.com
