5.4 Power
up
Connect the DMA power adapter. Power on the display, and point the remote
control towards the front panel of the DMA unit and press the POWER button
on the R/C. When on servers are available or set up, the display will appear as
follows:
To set up the network connection, refer to the Network Connection Setup
section.
The DMA unit provides memory card support. If a memory card with content is
installed, it will be identified in the Media Sources display.
Networks
Computer01:Owener
SERVER
Computer02
Item 0 Media Sources
Media Sources
5.5 DMA Remote
The DMP Remote control (R/C) uses infrared so it must be aimed toward the
front of the DMP enclosure. The remote has the following keys and functions
for navigating the Setup interface
To use the remote control unit to operate the DMA
player, insert two batteries (size AAA) making
sure that the + and – ends of the batteries are
matched to the +/– marks printed inside the
battery compartment.
