Upright POWERED ACCESS TL34 Скачать руководство пользователя страница 8

Страница: 8 / 79

The

TL34

is a trailer mounted work platform with a 2-man cage giving access to maximum

height of 12.20m. It offers safe, versatile and easy access for two men plus tools up to a

total of 215Kg. Its unique boom configuration allows this height to be reached while still

offering compact closed dimensions and exceptional manoeuvrability. It is manufactured

from steel hollow sections conforming to BS4360 1986. All joints are fully welded by

Metal Inert Gas (MIG) or Manual Metal Arc (MMA) processes. The main pivots are set in

bushed housings. The bushes are self-lubricating for minimum maintenance and long

life. The main boom pins are chromed and all other pins are Tuftridge

coated.

The platform is powered by a 12V DC battery pack operating an electric motor which

in turn drives a hydraulic pump. This provides a maximum hydraulic pressure output

of 210 Bar max. Battery powered models are fitted with an ‘on-board’ battery charger.

Limit switches are fitted to the stabilisers thereby ensuring that the booms cannot be

elevated unless the stabilisers are first deployed. Machines equipped with hydraulic

stabilisers are also fitted with a limit switch on the booms to ensure that the stabilisers

cannot be operated when the booms are elevated. Lift is provided by single acting

hydraulic cylinders on the top and bottom boom and rotation is achieved by the use of a

hydraulic motor driving a pinion via a gearbox.

Control is provided by a live hydraulic system. Lift is controlled from monoblock bank

valves, mounted in the cage and in the control cabinet at the ground, which allows

precise control of the two platform functions (Lift and Rotate). The lift cylinders are fitted

with solenoid operated check valves which ensure that in the event of hose failure, the

platform will not descent without deliberate action being taken to lower the platform. The

lift cylinders are also fitted with a flow control valve to control the rate at which the

platform descends.

All equipment at ground level except the rotation motor is situated on the cabinet on the

side of the platform.

Facility is provided for lowering the platform at ground level in the case of any emergency

Performance.

Maximum Working Height

12.20 m

Maximum Working Outreach:

5.00 m

Capacity (2 man working):

215 kg

Slewing Arc:

360 degrees°

Airborne Noise Emissions: 70 dB(A)

European Directives.

1) 2006/42/EC – the Machinery Directive.

2) 2004/108/EC – the Electromagnetic Compatibility Directive.

3) 2006/95/EC – the Low Voltage Directive.

The machine is designed and tested in accordance with European Standard EN280.

DESCRIPTION OF EQUIPMENT

Содержание POWERED ACCESS TL34
















































































Результаты поиска

Содержание POWERED ACCESS TL34

Отзывы:

Похожие инструкции для POWERED ACCESS TL34

Бренды по названию

Популярные бренды

Upright POWERED ACCESS TL34, Руководство по обслуживанию

Результаты поиска

Содержание POWERED ACCESS TL34

Отзывы:

Похожие инструкции для POWERED ACCESS TL34

Бренды по названию

Популярные бренды