Thank you for purchasing our product.
Please read this manual carefully before using the product and follow the safety guidelines.
＜for Windows ＞
Touchpad Mode Gestures
Tap : Right click
Top ↔ Bottom Slide : Screen scroll
Left ↔ Right Slide : Screen/Document scroll
Tap : Select area
・3 Fingers
Left ↔ Right Slide : Switch task menu
Slide to Top : Zoom in on current task
Slide to Bottom : Zoom out on current task
(Windows 8.0 or newer)
・2 Finger Pinch
・2 Fingers
Tap : Right click
Top ↔ Bottom Slide : Screen scroll
Left ↔ Right Slide : Swipe Page
・2 Fingers
Track : Mouse pointer
Tap : Left click
・1 Finger
Track : Mouse pointer
Tap : Left click
・1 Finger
Pinch Out : Zoom in
Pinch In : Zoom out
・4 Fingers
・5 Fingers
Pinch In : Show desktop
Tap : Search
・3 Fingers
Left ↔ Right Slide : Switch full screen applications
Slide to Top : Displays “Mission Control”
Slide to Bottom : Displays applications
・4 Fingers
・5 Fingers
Pinch Out : Display desktop
・5 Fingers
Pinch In : Display launch pad
( “Launchpad” shortcut key
such as “L” must
be set beforehand )
Caution : Please make sure the correct shortcuts are setup in the settings program
1st Revision 2015/9/1
UPQ Inc. All rights reserved.
・2 Finger Pinch
Pinch Out : Zoom in
Pinch In : Zoom out
＜for Mac OS X＞
Supported Operating Systems
・Windows 8
・Mac OS X
Accessories
・USB to micro USB cable : 1pc
・Cleaning cloth : 1pc
Startup Guide
1. How to connect
Connect the smaller micro USB plug to the keyboard then connect the larger standard USB plug
to the computer. When the keyboard is successfully connected to the computer, driver installation
will begin automatically.
2.Changing the keyboard settings for each OS
Settings for Windows 8 : Fn key + [ ]
Settings for Mac OS X : Fn key + [ ]
3.Switching modes
Press [ ] to change to keyboard mode, press [ ] to change to touch panel mode.
Press [ ] to enter sleep mode.
4. LED backlight settings
The LED backlight will automatically turn off after not using the keyboard for 5 consecutive
minutes, it will turn back on again when touched.
Switch on/off the backlight by touching the keyboard with 10 fingers.
Press [ ] +[ ] to turn on/off the LED backlight feedback.
Press Fn key + [ ] + [ ] to change the LED backlight brightness level.
5. Restoring settings after power loss
Keyboard settings and LED backlight settings will be automatically restored if you previously
saved the settings. If you didnʼt save the settings, you have to set them up again.
User Manual
Do not drop, hit or apply excess pressure to the product.
Please do not attempt to personally repair or dismantle the product.
Please follow your countryʼ s electronic waste disposal regulations or laws when you dispose of
this product.
If there is something wrong with this product please discontinue use and contact the support
center ([email protected]).
・
・
・
・
Safety Guidelines
