ENG
34
is closed, “Source A” is present and regular).
5
“Source B” status OK contact (if the contact between “pin 5” and “pin 1”
is closed, “Source B” is present and regular).
6
Status OK contact (if the contact between “pin 6” and “pin 1” is closed,
ATS functioning status is regular).
The following diagram shows the functioning of the contacts port.
The pins of the contact port are able to carry maximum
current of 8A and maximum voltage of 250Vac.
4.4 SLOT SNMP
It is possible to equip the ATS with an SNMP card to allow remote monitoring. The
code to be used is A03-SNMP2-IN. This code can be purchased by sending an email
to: [email protected].
Содержание A03-ATS16A
Страница 1: ......
Страница 27: ...ENG 27 If the temperature around the unit will rise above 40 C ventilation is required...
Страница 40: ...40...
Страница 41: ...Atlantis via C Chiesa 21 Pogliano Milanese MI 20010 Italy info atlantis land com...
