UPOWER A03-ATS16A, Руководство пользователя

Страница: 25 / 41

ENG
25
MANUAL
Congratulations on your purchase of Atlantis ATS.
This manual discusses how to install and use this device. This manual contains
important safety instructions. Please follow all instructions carefully during
installation. Read this manual thoroughly before attempting to unpack, install or
operate.
1.0 ATS
This ATS (Automatic Transfer Switch) also known as STS (Static Transfer Switch) is
designed with two independent power inlets to supply power to the load from primary
power source. Should primary power source fail, the secondary will automatically
backup the connected equipment without any interruption. The transfer time from
one to another is seamless to the connected equipment. After switching to a
secondary power source, the ATS can also switch power back to the primary input
when power to the primary input is restored. Supports all UPS (Online,
LineInteractive, OFFLine) models up to 3000VA.

Provides seamless power switch for IT equipment

Preferred source selection on front panel

Maximum 16A Input current @ 180 - 258 VAC

Transfer Time 9-12 ms
1.1 Inspection
Inspect the device upon receipt. Notify the carrier and dealer if there is damage. The
package is recyclable; save it for reuse or dispose of it properly.
1.2 Package Contents
Make sure that you have the following items :

Maintenance bypass switch module

Power Cable

Kit Rack

Manual (Eng, Ita)

WEEE Instructions & Warranty
If any of the above items are missing, please contact your reseller.