Uponor Climate Control Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 64

Uponor Climate Control Скачать руководство пользователя страница 6

View the IP address and connect from a home computer

You can connect to the Climate Cŏntrol™ Network System from any computer
connected to your home network. This can be especially useful for setting up the
more complex features of the system such as the schedules and calendars.

Each Touch Panel Interface device has a unique IP address to identify it on the network. To connect to the Climate
Cŏntrol™ Network System from your home computer, you can enter the IP address for any of the Touch Panel
Interface devices in your home.

For most tasks, you can connect to any of the Touch Panel Interface devices in the system. However, if you want to
update the settings for a particular Touch Panel Interface, you must enter the IP address for that particular device.
For example, if you want to change the back light timing for the Touch Panel Interface located in the kitchen, you
need to know the IP address for the kitchen Touch Panel Interface.

Note:

The system will support only one computer connection at a time. To connect from another home computer,

you must first close the web browser on the first computer. If you try to connect from more than one computer at a
time, you might see unexpected results on the Touch Panel Interface.

To view the IP address:

1.

Click the

button.

2.

Click the

System Properties

tab.

3.

Click the

Touch Panel Interface

button.

4.

Click the

System IP Address

button.

To connect to the system from your home computer:

1.

On a computer connected to your home network, open a web browser (such as Windows

®

Internet Explorer).

2.

In the address bar, type the IP address of one of the Touch Panel Interface devices.

«
...
4
5
6
7
8
...
»

Содержание Climate Control

































































Отзывы:

Нет отзывов