Press and hold MODE for 3 seconds to Clock Setting mode
Press MODE again to Month/Date setting mode
Press HOUR/+/MAX to set month
Press MINUTE/-/MIN to set date
Press MODE to enter Year setting
Press HOUR/+/MAX or MINUTE/-/MIN to adjust Year
Weekday is automatically determined from the year/month/day setting
MONTH & DATE, YEAR SETTING
a
b
c
d
f
P.6
WS928+WT440H
Wireless Weather Station
KNOW YOUR PRODUCT
button placement
1
6
2
3
4
5
Minute/-/Min: shows mi nimum temperature; adjusts
clock, alarm, date & year and temperature alarm values
Snooze/Mode: scrolls through Clock 1 & 2, Alarm 1 & 2,
Date & Year, and Temperature Alarm(high & low) mode;
snooze for alarm
LCD display
ON /OF F /(C/ F):
toggles betwe en C and F, 12 and 24 hour
forma t, Alarm 1 & 2 on and off; disables (resets) high &
low temp erature alarms
Ch annel: scrolls through remo te channels Ou tside,
Ou tside 2 and Ou tside 3); scrolls through local and remo te
channels (Ou tside, Ou tside 2 and Ou tside 3) in (high & low)
temp erature alarm mo de; activate learn process
Ho ur/+/ Ma x: shows ma ximu m temp erature; adjusts
clock, alarm, date & year and temp erature alarm values
P.1
P.5
P.7
P.4
P.8
Inside temperature /
humidity trend symbol
P.2
or will flash, and the sound volume
will gradually from low to high
Press SNOOZE to snooze the alarm for 5 minutes,
after that the alarm will sound again
Press ANY other key will shut off the alarm.
Without interruption, the alarm will shut off
automatically after one minute
ALARM SETTING
a
b
c
P.3
7
10
11
8
9
SET:
enter to House code and Channel setting mode
C/F:
change between °C or °F,
change channel and house code
Battery compartment
LCD display
Wall mount holder &
table stand
7
8
9
9
Scroll to Alarm1 mode (Alarm2 mode) using MODE
Press HOUR to set hour
Press MINUTE to set minute
Press ON/OFF/(C/F) to set alarm on or off
When the alarm is set ON, the bell
symbol / will appear
1
2
3
4
5
11
Press and hold MODE for 3 seconds to enter the clock setting mode
(the CLOCK 1 symbol appears and the time will flash)
Press HOUR to set the hour and MINUTE to set the minute;
Press ON/OFF(C/F) during clock setting, to change between
12 and 24 hour display.
Do not press any key for 1 minute to finish clock setting
Scroll to Clock 2 mode using MODE
Press + or - key to change the time
i
ii
iii
iv
vi
v
6
1
2
3
4
5
11
i v
vi
ii
iii
2
1
OUT
1
3
4
OUT
1
4
1
2
3
4
b
#
e
WS928 receiver
Inside temperature /
humidity reading
Outside temperature
reading
Outside humidity reading
Outside temperature
trend symbol
Outside humidity trend
Pressure trend symbol
Pressure reading
Moon phase
Comfort level icon
Weather forecast
symbols
Month/Day, Year
Alarm clock
Clock
Weekday
Temperature/
pressure historical
bar graph
Clock 1 Setting
Clock 2 Setting
Alarm 1and Alarm 2 setting
When alarm sounds
d e
b
f
c f
#
a
The colon symbol " " appears if
date value is 2-digit (e.g. 13, 26...)
*
*
MANUAL CLOCK SETTING
READ THIS BEFORE YOU BEGIN
Insert batteries into the remote transmitter(s) first, and then the receiver.
For the best operation,
Although remote transmitters are weather resistant, it is recommended to place it away from direct
sunlight, rain or snow. This will help to make condition readings more accurate.
Place the receiver and remote transmitter(s) close together. This will ensure that the receiver
synchronizes with remote transmitter(s).
Place the remote transmitter(s) outdoors within an effective transmission range.
3
1
*
2
The transmission range can be affected by the dense walls or electronic interference
in between the receiver and transmitter. Try various set-ups for best results.
#
2
4
6
3 5 7
1
1
1
1
%
1
8
GETTING STARTED
Remove battery cover and insert 2 AA size batteries. Insert
between terminals observing proper polarity then replace cover.
1
Remove battery cover and insert 2 AA size batteries to start setup.
The HOUSE CODE will flash for 8 seconds
Select the HOUSE CODE by pressing C/F
Select CHANNEL(1-4) by pressing C/F. This number will be confirmed upon pressing
the SET button, or if no key is pressed for 10 seconds. If only one transmitter is available,
it is recommended to leave the CHANNEL be "01”
The range of House Codes are from "01" to "15". Make sure all transmitters
in your system are set to the same House Code.
Humidity & Temperature will display
Select °C or °F of Temperature by pressing C/F and pressing SET. Once setup of remote
transmitter is completed, it will start transmitting at one minute intervals
STEP 1 : setting the remote transmitters
* Use a different house code if your weather station detects
other signals from neighboring sources
* Factory default: house code = 01 and channel = 01
STEP 2 : setting the receiver
8
2
3
4
5
6
7
1
1
2
2
3
4
SYNCHRONIZATION
Automatic Learn Function:
Manual-Learn Function (Searching for Remote Signals):
The Learn function begins automatically and runs for
3 minutes when receiver batteries are first installed.
Press and hold Channel for 3 seconds in clock display mode
If a new transmitter is added or if signal is lost (outdoor display blinking),
the learn function must be executed again.
Within these 3 minutes, the receiver will beep and display
the temperature & humidity signals from transmitter(s).
A beep sound indicates that learn function has started
The Outside
the
symbol will flash and
unit
will beep as each remote sensor is detected
Temperature & humidity readings of the
remote sensor will display on the receiver.
If the signals are not received within this 3 minutes, the outside temperature and
humidity will show " ". If this is the case, bring the units closer togther or
try a different location. Then restart the auto learning function by temporarily
removing the batteries from receiver.
*
Moon Phase Display
MOON PHASE
The moon phase is automatically updated
according to the year/month/day.
New Moon
Young Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Old Crescent
1
2
8
7
6
5
4
3
WT440H
Transmitter
1
OWNERS MANUAL
SET
C/F
-
A
A
1
.5
V
+
-
A
A
1
.5
V
+
1
10
SET
C/F
-
A
A
1
.5
V
+
-
A
A
1
.5
V
+
SET
C/F
-
A
A
1
.5
V
+
-
A
A
1
.5
V
+
TEMPERATURE / PRESSURE
HISTORICAL BAR GRAPH
Note: If you have multiple transmitters
press CHANNEL to scroll through below
sequence:
The bar graph lets you see the pressure trend over a period of 24 hours.
(automatically resets at midnight). The bar graph will show the Pressure
Trend (Default), or the Local or Remote
Temperature by pressing ON/OFF(C/F)
in Clock1 mode.
The sequence is:
Pressure Trend
Inside Temperature Trend
Outside Temperature Trend
( , , )
Pressure Trend
Inside Temperature Trend
Outside Temperature Trend
Channel 1
Channel 2
Channel 3
