Installation 1
Installation 2
www.upshine.com [email protected]
Step1
Step2
L
N
Step3
BLUE
BROWN
L =
N =
Step4
Step1
Step2
Put the LED batten back until it is stuck by clips.
Knock 2pcs plastic anchors into ceiling.
Fastening the clips on the ceiling.
Open the end cap, put the wires through the
hole, connect the terminal block (Brown to L,
Blue to N), tighten the end cap to prevent the
water into the lamp.
Knock 2pcs plastic anchors into ceiling, fix the wire regulating
device on ceiling.
Put the hook through metal plate, embed the metal plate in the slot
of the lamp body.
100-130V
12
26
UP-DB18-1600-40W
200-277V
Linkable luminaries Qty
ART-NR
