Stand 19.2.2020
25 von 72
DE
EN
FR
NL
IT
ES
PL
cannot be continued. This means that you may have to replace the water
and beans to obtain an optimal coffee result.
19. If you’d like to select another operating mode after pressing “EIN/AUS”,
open and close the lid of the device briefly.
20. You can remove the pot at any time during the brewing process. The drip
stop prevents residual coffee from dripping out of the filter. Put the pot back
under the filter within 30 seconds, so that the filter does not overflow.
21. The warming plate remains switched on as long as the coffee maker is
switched on, in order to keep the coffee remaining in the coffee pot warm.
After 40 minutes the appliance automatically switches off. If you do not
want the warming function, turn the control dial to “Stop”.
22. After pouring out all of the coffee and emptying the pot completely, do not
place the empty coffee pot on the hot warming plate.
23. Remove the filter and dispose of the coffee grounds.
24. Then clean the appliance.
25. Note: If the appliance aborts the brewing process, the appliance must be
descaled. Additional instructions are provided in the section “Descaling”.
The appliance is very hot during and after operation!
CLEANING AND CARE
Before cleaning, always turn off the appliance
and unplug it from the electrical outlet.
Allow the appliance to cool before cleaning it.
Clean the appliance after every brewing
process, particularly if you have used coffee
beans.
1. Do not immerse the appliance and power cord in water or other liquids or
wash them in the dishwasher.
2. Open the lid of the appliance and remove the filter. Dispose of the coffee
grounds.
3. Condensation can collect above the filter. After brewing coffee, wipe off the
bottom of the lid with a dry cloth.
4. Remove the chamber on the lid and clean it under flowing water. Thoroughly
dry the chamber before re-inserting it.
Copyright UNOLD AG | www.unold.de
