Unold 18705, Инструкция по эксплуатации

Страница: 22 / 76

22
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.
BEFORE USING THE APPLIANCE THE FIRST TIME
1. Remove all packaging materials and any transport safety
devices. Keep packaging materials away from children - danger
of suffocation!
2. Clean all parts as described in the chapter “Cleaning and care”.
3. Check to make sure that the appliance is stable.
4. Connect the base via the power cord to the power supply (220–
240 V~, 50/60 Hz).
5. Remove the kettle from the base.
6. Open the lid by pressing the button at the handle.
7. Add clear, cold water to the “Max” marking.
8. Close the lid by pressing lightly.
9. Place the kettle level on the base.
10. Switch on the kettle by pressing the ON/OFF switch.
11. The kettle cannot be switched on if it is not properly seated on
the base.
12. When the water boils, the appliance automatically shuts off.
13. For hygienic reasons, please discard the water from the first
boiling.
FUNCTIONS
The kettle has two functions:
Heating or boiling water
The water is warmed to the pre-set temperature. Thus you obtain
lukewarm to briskly boiling water, as desired. The temperature can
be set in -5°C increments between 100°C and 60°C.
The factory preset is 100°C.
Keeping warm
The previously boiled water is kept warm at the desired temperature
after boiling/heating. The temperature at which the water is kept
warm can be set in -5°C increments between 100°C and 60°C. The
Copyright UNOLD AG | www.unold.de