8
Pairing the outdoor sensor with the weather station
Once the weather station is installed batteries), it will start receiving the pairing RF signals
from the outdoor sensor with the same channel for 3 minutes. You can touch the
CH
button
on the base unit to match the correct outdoor sensor.
Generally, the outdoor sensor will connect with the base unit automatically. If it doesn’t
connect, please follow below steps to set:
• Ensure that the weather station is in the same channels with the outdoor sensor.
• Long press the
CH
button on the base unit to search signal from the outdoor sensor.
• The sensor receiving icon will flash when searching for the signal.
• After the sensor is connected, the icon will become stable.
• Your weather station will search for the signal each 3 minutes every hour automatically
until it is connected.
Note: After replacing the sensor battery, you need to press and hold the
CH
button of the
station to receive again.
Mold indicator, dew-point display and heat index
Press the
INDEX
button to display the data.
First time press: Mold indicator
Second time press: Dew-point display
Third time press: Heat index
Mold indicator
The mold indicator ("MOLD" on the display) consists of temperature and humidity.
The indicator shows the possibility of mold growth.
Possible indicators:
Dew-point display
The dew point (“DEW” appears on the display) is the temperature below which dew or mist
forms from damp air.
Information:
-If the dew point is below 32°F, "LL.L" will appear on the display.
-If the dew point is higher than 140°F, “HH.H” will appear on the display.
Heat index
The heat index (“HEAT” on the display) consists of temperature and humidity, and displays
the perceived temperature.
- When the outdoor temperature is below 80°F, displays “ current actual temperature ”.
- When the outdoor temperature is over 80°F, the value will be calculated by software.
- When the outdoor temperature is over 158°F, displays “ 158°F ”.
