8
Setting the weather symbol
When the weather station is connected to the adapter or batteries on the first time, it will
enter the weather symbol setting. You can follow below steps.
1.You will see the weather symbol starts flashing, and the default is half sunny. It will
automatically adjust to the correct symbol. However, if you want to shorten the reception
time of the weather station, you can manually adjust it through
and
button.
2.Press the
button to save the setting.
Pairing the outdoor sensor with the weather station
Once the weather station is turned on (plug in or installed batteries), it will start receiving
the pairing RF signals from the outdoor sensor with the same channel for 3 minutes. You can
touch the
CHANNEL
button on the base unit to match the correct outdoor sensor.
Generally, the outdoor sensor will connect with the base unit automatically. If it doesn’t
connect, please follow below steps to set:
• Ensure that the weather station is in the same channels with the outdoor sensor.
• Long press the
CHANNEL
button on the base unit to search signal from the outdoor
sensor.
• The sensor receiving icon will flash when searching for the signal.
• After the sensor is connected, the icon will become stable.
• Your weather station will search for the signal each 3 minutes every hour automatically
until it is connected.
Note: After replacing the sensor battery, you need to press and hold the
CHANNEL
button of the station to receive again.
