P a g e
| 3
ÜKYP/YP Automatic Fuel Loading, Central System Heating Boiler Usage and Maintenance Manual
METHOD OF SHIPPING, HANDLING AND TRANSPORTING
ÜNMAK UKYP/YP series boilers are manufactured from thick sheet metal. Boilers are packed in one
piece.
1. Boiler Group: The boiler is shipped with its insulation and outer jacket. Bunkers and engines
are sent to the boiler as coupled.
2. Accessories: Control panel, user manual with warranty and boiler accessories (scrape,
cleaning brush) are included in the package of the boiler.
Safe transport of the product
UKYP/YP group boilers are heavy products, so care
should be taken when moving the boiler to the place
where it will be installed. Therefore, the equipment
to be used to lift and transport the product should be
of sufficient capacity.
In order not to damage the boiler outer sheets and
the boiler during transportation; While carrying the boiler with the help of a crane or hoist by passing
a carrying rope through the forklift stands on its chassis, care should be taken that the carrying rope
does not damage the painted thin sheets of the boiler and the reducer-fan group under the bunker.
It is convenient to lift the boiler from the forklift stands or the carrying ring on the
boiler. The boiler standing on the ground should be lifted directly without pulling
with a crane. When transporting in cold weather, the boiler should not be lifted
suddenly in case the rope freezes from the cold.
It is convenient to lift from the forklift stands or the carrying ring on the boiler. If
the connecting ropes are to be passed under the boiler while lifting by crane,
preventive measures should be taken against crushing the top of the boiler by
the ropes. The boiler standing on the ground should be lifted directly without
pulling with a crane. When transporting in cold weather, the boiler should not
be lifted suddenly in case the rope freezes from the cold.
Care should be taken not to damage the reducer and fan under the bunker during
transportation.
When removing the packaging around the boiler, hard and sharp objects should not be
used in order not to damage the painted boiler sheets under the package.
