Uniz SLASH 2 PLUS, Руководство пользователя

Страница: 15 / 37

9
C INTERFACE INFORMATION
TOOLS
LCD TEST
Click LCD TEST you will see the UNIZ Logo appears on the LCD screen. If the logo can be shown
completely and there is no any flicker, that means the LCD screen is in good condition.
EXPOSURE CLEANING
When a failed print occurs and there are some residues left in the bottom of Resin Tank. You could
use EXPOSURE CLEANING function to clean the residues. The printer will cure the whole screen
and make residues adhere on solidified piece. After that, please wear nitrile gloves and take the
solidified piece out.