6
It is recommended to use a tripod floor stand for easy and flexible placement of the
loudspeaker. If the loudspeaker is set up at the back of the room and directed towards the
speaker, those who are in the back of the room (and thus further away from the speaker)
get a helping acoustic boost, while those who sit at the front hear the speaker acoustically
anyway. The large distance between the microphone and the loudspeaker minimizes the
risk of acoustic feedback.
Tapping the signal
The signal from the amplifier can be tapped to an external system from the RCA, marked
“Out” (7). Please consider the risk of feed back, if the system includes loudspeakers.
Trouble shooting guide
Use Univox® Listener to check the sound quality and basic level of the loop.
Verify the control LED's following the instructions in this installation guide.
Should the system not work after having made the product test as described above, please
contact the local distributor of the product for further instructions.
Note
Warranty is not valid for any damage or defects on the product due to incorrect or
incautious installation (or usage).
Safety/Warranty
Basic knowledge in audio and video installation techniques is required to achieve existing
regulations. The installer/planner is responsible for the installation hereby avoiding any risk
or cause of fire.
Also note that warranty is not valid for any damage or defects on the product due to
incorrect or incautious installation (or usage).
Bo Edin AB shall not be held responsible or liable for interference to radio or TV equipment,
and/or to any direct, incidental or consequential damages or losses to any person or
entity, if the equipment has been installed by unqualified personnel and/or if installation
instructions stated in the product Installation Guide have not been strictly followed.
