uniview technologies Uniarch IPC-B112-PF40, Руководство пользователя

Страница: 28 / 42

23
Snapshot
NOTE!
This function is not supported by some models. Please see the actual model for details.
1. Click Setup > Video > Snapshot .
2. Select On , and then set resolution, most large and schedule as needed. Some parameters are described
in the table below.
Parameter Description
Snapshot Interval
Interval between two snapshots. For example, with Snapshot Interval set to 1 and
Number of Snapshot set to 2, the camera will take 2 snapshots (take one first and
then take another after 1 second).
Number to Snapshot Currently 1, 2, and 3 snapshots are allowed.
Snapshot Mode
Schedule : You need to set a snapshot time, e.g., 19:12:00, which means the camera
takes a snapshot at 19:12:00.
Repeat : Allows you to set an interval (unit: sec). For example, according to the
settings shown in the figure above, 60 seconds must elapse before the camera takes
another two snapshots.
3. Click Save .
ROI
When Region of Interest (ROI) is enabled, the system ensures image quality for ROI first if the bit rate is
insufficient.