8
DHCP
The Dynamic Host Configuration Protocol (DHCP) is enabled by default when the camera is delivered. If a
DHCP server is deployed in the network, the camera can automatically obtain an IP address from the DHCP
server.
To manually configure DHCP, follow the steps below:
1.
Click
Setup
>
Network
>
Network
.
2.
Select
DHCP
from the
Obtain IP Address
drop-down list.
3.
Click
Save
.
IPv6
NOTE!
This function is not supported by some models. Please see the actual model for details.
1.
Click
Setup
>
Network
>
Network
.
2.
By default the
IPv6
mode is set to
Manual
.
3.
Enter the IPv6 address, set the prefix length and default gateway. The IP address must be unique on the
network.
4.
Click
Save
.
Port
1.
Click
Setup
>
Network
>
Port
.
2.
Configure relevant port numbers.
3.
Click
Save
.
Содержание Uniarch IPC-B112-PF40
Страница 1: ...Network Cameras User Manual Manual Version 1 00 ...
Страница 5: ...ii Appendix B FAQ 37 ...
Страница 7: ...2 Add the IP address as a trusted site 1 13 1 2 ...
