uniview technologies CI111UNV33, Быстрое руководство

Страница: 20 / 32

7
6. Adjust the monitoring direction.
Start the Camera
Use a power adapter (12 VDC or 24 VAC, not included in the
package delivered) to start the camera. After you have mounted
the camera properly, connect the camera to power.
Hex fillister-head screw
Loosen two hex fillister-head screws
using a 4# hex L-key (that should be
purchased separately) to avoid
damaging the universal joint. Then
adjust the camera to the desired
monitoring direction. Fasten the
screws to finish.