Univex RDRE Series, Инструкция по эксплуатации

Страница: 24 / 44

RDRE - electric version - gas version - Page 22
The
semi-static mode stops
the fans when the temperature reaches the set-point and restarts them
every time the heating elements are on, keeping the temperature inside the cooking chamber constant. In
this mode, the cooking is comparable to the one made with a static oven.
Speed "
5
" "
4
" and "
3
" will be displayed in blue, while "
2
" and "
1
" will be in red. The semi-static mode will be
highlighted by the word " Pulse " on the display.
Use the " - " button to select the fan speed/mode and confirm using the key.
3.
Setting the oven chamber temperature:
Now we are going to set the cooking temperature. The “temperature” symbol (display 2) will begin to
flash. Set the desired value using the “
+ ” and “ - “ keys. Press the key to confirm the parameter.
4.
Setting the oven chamber climate:
After setting the temperature value, the legends “Dry” (blue) and “Steam” (red) flash in sequence on
display 3. Using the “ + ” key, you can increase the percentage value of steam injection during the baking
cycle. The numerical scale of display 3 will be red Using the “ - “ key, you can decrease the percentage
value of steam injection during the baking cycle. The numerical scale of display 3 will be blue. Once the
desired climate has been set, confirm the parameter by pressing the
key. Setting the value at 0
(display flashing) excludes the Climate parameter from the programming.
 Store all the settings by pressing and holding down the key for 3 seconds.
Now all the parameters for manual baking have been set. Press the key to start the programme. The oven
begins its baking cycle with the preheating phase ( if set during the programming phase). The end of this phase
will be indicated by an acoustic signal and the flashing of the lamps inside the chamber. Open the door and place
the product in the oven. Once the door has been closed, the actual baking cycle will begin. You can stop the
baking cycle before it's programmed to end simply by pressing the
key for 3 seconds.
The set parameters can be changed at any time during the baking cycle (except during the preheating phase).
Press the
key, change the desired value using the “ + ” and “ - “ keys and confirm by pressing the key. The
changes will take effect immediately.
PROGRAMME MODE (CUSTOMIZABLE PROGRAMMING):
 The ovens of the Rotorbake Series allow you to store up to 60 baking programmes, customized according
to the user's needs. Up to 5 Steps are available, each of which include: time, Multi-timer ( if selected ), fan
speed, temperature, and climate. At the start of the programmed baking cycle these steps will be executed
in sequence, thus dividing the programme into true complete cooking phases.
To store a programme, proceed as follows:

Press the key. Using the “ + ” and “ - “ keys, select the first empty programme. Confirm the operation by
pressing the key. The first option refers to the pre-heating: press the key and use " + " and " - " to
choose whether to include this phase in the programme. Confirm the setting by pressing the key.

Now you can start programming the Steps: the “Step 1” icon comes on to indicate the first sequence of
parameters that will make up the programme. Set each parameter, confirming the value with the
key.