universalblue UBLAV2702-21, Руководство пользователя

Страница: 56 / 93

56
3. INSTALLATION
Installation of electrical connections must be carried out
only by authorised professionals.
If the appliance must be moved at any time, keep it in an
upright position; if absolutely necessary, it may be tilted
onto its rear.
POSITIONING AND LEVELLING

Remove the device from all packaging and check that it has
not been damaged during the transport. If it is damaged,
contact the seller and do not continue with the installation
process.

Place the dishwasher in the desired location. Please refer to
the features section to find out if your device can be built in or
freestanding model.

Place the dishwasher on a level, sturdy floor. If the floor is
uneven, the front feet of the appliance can be adjusted until it
reaches a horizontal position (the angle of inclination must not
exceed 2 degrees). If the appliance is correctly leveled, it will
be more stable and less likely to move or cause vibration and
noise during operation.
CONNECT THE DEVICE TO THE WATER AND POWER SUPPLY
The connection to the water and electricity supply may only
be carried out by a qualified technician.
The dishwasher must not be above the water hoses or the
power cord.
The device must be connected to the water supply by means
of new pipes. Do not use old pipes.
WATER INLET HOSE CONNECTION