UT8836R
PL-2077
FPMC
Read Operating Instructions
Always become familiar with all the instruc-
tions and warnings before operating any
pneumatic tool.
Always Wear Approved Eye Protection
Impact resistant eye protection should meet
or exceed the standards as set forth in the
United States ANSI Z87.1, Occupational and
Educational Eye and Face Protection. Look
for the marking Z87.1 on your eye protection
to insure that it is an approved style. For
further information, ANSI Z87.1, Occupa-
tional and Educational Eye and Face
Protection, is available from the American
National Standards Institute, Inc., 11 West
42nd Street, New York, NY 10036.
Hearing Protection is Recommended
Hearing protection should be used when the
noise level exposure equals or exceeds an 8
hour time-weighted average sound level of
85dBA. Process noise, reflective surfaces,
other tools being operated nearby, all add to
the noise level present in your work area. If
you are unable to determine your noise level
exposure, we recommend the use of hearing
protection.
Avoid Prolonged Exposure
to Vibration
Pneumatic tools can vibrate during use.
Prolonged exposure to vibration or very
repetitive hand and arm movements, can
cause injury. Stop using any tool if discom-
fort, tingling feeling or pain occurs. You
should consult your physician before
resuming use of the tool.
90 PSIG Maximum
This tool is designed to operate at an air
pressure of 90 pounds per square
i
nch
gauge pressure (90 PSIG) maximum, at the
tool. Use of higher air pressure can, and may
cause injury. Also, the use of higher air
pressure places the internal components
under loads and stresses they were not
designed for, causing premature tool failure.
The air supply should be clean and dry,
preferably lubricated. For best results, drain
the moisture from your compressor daily.
Use Accessories Rated At or Above the
Tool RPM Rating
Always disconnect tool from air supply before
changing accessories. Never hold work in
hands, lap or against other parts of the body.
Secure all work with clamps or a vice so that
both hands are free to operate tool. Keep
proper footing at all times. Verify tool direction
before starting. Do not change direction of
tool while tool is running. Do not force tool,
allow drill to work at designed pace.
PLEASE READ AND FOLLOW ALL WARNINGS
Universal Tool
A Division of Florida Pneumatic Manufacturing Corporation
851 Jupiter Park Lane, Jupiter, Florida 33458
Toll Free 1-800-327-9403
Reversible Drill
Description
Universal Tool reversible air drill features heavy duty planetary gearing for long life with ball bearing construction throughout. The
trigger mounted reverse lever provides quick direction changes with through handle exhaust to reduce noise levels. This tool has
an excellent power-to-weight ratio and comes equipped with a Jacobs
®
chuck. Contoured polyurethane grip reduces vibration to
the operator.
Free Speed ..............................................................1,800 RPM
Chuck capacity.....................................................................3/8"
Length.................................................................................6.18"
Weight..............................................................................2.2 bs.
Air inlet size................................................................1/4" NPT
Recommended hose size...........................................3/8" I.D.
Average air consumption.............................................6 CFM
Maximum air pressure..................................................90 PSI
Specifications
