14
USING THE MASTER POWER KEY
The Atlas XL Universal Remote Control has a unique fea-
ture that allows you to sequentially turn on or off up to
four of your home entertainment devices with a single
key press.
NOTE:
MASTER POWER
requires programming and only works in
the
CBL
mode. If it is not programmed, only the cable converter
will turn on or off. In any other mode, pressing
MASTER POWER
once will turn on or off the selected device.
To Program The Master Power Key:
1.
On the remote control, press and hold
SETUP
until the last-selected device key blinks twice,
then release
SETUP
.
2.
Enter
9
-
9
-
5
. The last-selected device key
will blink twice. Then press
POWER
once.
3.
For the first device you want in the
power on
sequence, press a device key (e.g.,
TV
) once
and then press
POWER
once.
4.
Repeat step 3 up to three more times to add the
second, third, and fourth device, as desired.
5.
To save the settings and exit the program, press
CBL
once. Next, press and hold
SETUP
until
the
CBL
key blinks twice, then release
SETUP
.
To Operate The Master Power Key:
1.
After programming, point the remote control
at the devices. Press
CBL
once.
2.
Press
MASTER POWER
once to sequentially
turn on or off all home entertainment devices.
3.
You will see the devices turn on or off
according to the programmed sequence.
To Clear The Master Power Key:
1.
Perform steps 1 and 2 in the first section
above,
To Program The Master Power Key
.
2.
To clear the settings and exit the program,
press and hold
SETUP
until the
CBL
key blinks
twice, then release
SETUP
.
Atlas XL Eng/Sp Manual 4/21/03 4:21 PM Page 14
