Universal Devices ISY-994i Series, Руководство пользователя

Страница: 229 / 692

Page | 206
10.2 Expression Operators
•
is - compares status
•
is not - compares inverse status
•
> - compares greater than status
•
< - compares less than status
10.3 Control vs Status
•
Control 'node' is switched On
o
When you use 'Control' you are testing for how it was turned on , eg. On, Fast
On, Off, Fast Off etc. You see the word 'switched' to emphasize that.
o
If the action listened for occurs (eg. Fast On) then this condition activates the
program (causes program to run either then or else path).
•
Status 'node' is On
o
When you use 'Status' you are testing for its current brightness level .
o
If the status changes then this condition activates the program (causes
program to run either then or else path).
This chart shows the difference between when the user presses a device button On vs when
a scene is triggered On by a device or controller on the INSTEON network.
•
Scene
o
node a (controller)
o
node b (controller)
o
node c (responder)
Figure 186: Button Press Status Table