43
5.
SAFETY FEATURES
Over-Heat Protection
•
This heater is protected with an over-heat protection cut-out
facility that switches it off automatically if it over-heats.
•
Overheating can be caused by obstruction to the air
intakes on the back of the heater or the grill on the front.
•
If this occurs please disconnect the heater from the power
socket and allow it to cool for 30 minutes. Remove any
obstruction and turn the heater back on.
•
The heater should operate normally. Should the problem
persist contact ours technical service.
Safety Cut-Out Switch
•
The heater is fitted with a safety cut-out switch to switch the
heater off if it is knocked over.
•
If the heater is knocked over and the
•
cut-out switch activates turn the heater off at the power
outlet and take EXTREME
•
care when standing the heater upright as it will still be hot.
•
Inspect the heater for damage especially to the heating
elements and supply cord.
•
If any damage is visible do not operate the heater.
6.
CLEANING AND CARE
IMPORTANT: Turn off the heater. Switch off the power
switch and disconnect the heater from the power socket.
Wait for the heater to be completely cool before cleaning.
•
Vacuum clean air vents and grilles to remove dust from
these areas.