SMART AMP (REF. 7472L1
–
7472L2)
5
3.
H
ARDWARE INSTALLATION
Installing the Smart Amp
•
Connect your Terrestrial antennas to the Smart Amp*
•
Connect the Smart Amp output to the Power Supply
•
Connect your TVs to the Power Supply
Important:
Mount the module vertically to a wall in a well-ventilated room and leave a
minimum space of 15 cm around the product to guarantee a maximum ventilation of
the product
* The Smart Amp does not allow p
ass-through DC-power for pre-amplifiers or active
antennas
How Autoscan works:
•
Plug in Power Supply
•
Status LED will blink green when scanning
•
Status LED solid green when autoscan ready (This can take up to 20 seconds)
•
Status LED red when error during scan. Unpower and repower within 6 seconds
to restart autoscan
•
WARNING
: do not turn off the power during SCAN
