Before first use
Unpacking:
This product has been packaged to protect it against
transportation damage. Unpack the appliance and keep the original
packaging carton and materials in a safe place. It will help prevent any
damage if the product needs to be transported in the future, while you can
also use it to store the appliance when it is not in use. In the event it is to
be disposed of, please recycle all packaging materials where possible.
Safe packaging disposal:
Plastic wrapping can be a suffocation hazard
for babies and young children, so ensure all packaging materials are out of
their reach and disposed of safely.
Inspection:
Unwind the cord to its full length and check if it has been
damaged. Do not use the appliance if the appliance or its cord have been
damaged or if it is not working properly.
In case of damage, contact the
after sales support line for advice on examination, repair or return of
the damaged product.
Assembly
1. Unscrew the four screws of the standing pipe and put the round base
cover through the standing pipe. Secure the lower pipe with Pipe
support onto the heavy base using the screws.
2. Extend the upper pipe, insert the pipe connector through the upper
pipe onto the lower pipe and tighten.
3. Attach the motor and body of the fan onto the upper pipe. Ensure that
the switch compartment is fully pushed onto the upper pipe and secure
with the provided screw.
4. Loosen the Guard Mounting Nut from the Motor Housing.
5. Position the Rear fan grille firmly onto the Motor Housing and then
fasten the Guard Mounting Nut by turning clockwise.
6. Push the Blade along the Motor Shaft and fasten firmly with the Blade
Lock Screw by turning counter clockwise.
7. Place the Front Fan Grille onto the Rear Fan Grill with the position fixer
provided at the rim of the Guard, and then fix together with the clips.
Instructions
Place the fan on a dry, level surface, plug it into a 240V 50Hz electrical
outlet and switch on the power to the outlet. Ensure the remote control
contains two AAA size batteries (not supplied).
Remote control operation
This fan is with 3 speeds, 3 modes, a 7.5hr timer and a remote control for
convenient operation. (You can also use the control panel to switch the fan
on and off, select a speed, set the timer and oscillation.)
