P/N 1069154U-
F1 (EN) • REV D • ISS 01MAR19
3 / 7
14
15
16
EN: Installation Sheet
Package
The package contains:
•
1X DDI602U-F1
•
1X drilling template for fixing holes
•
2X 31.75 mm / 1.25 in. wall plugs
•
2X 31.75 mm / 1.25 in. screws
•
1X lens mask
•
2X additional curtain shutters
•
1X tamper cup
•
2X tamper caps (different lengths)
•
1X plastic locking tool
•
1X installation sheet
•
1X front cover screw cap
Introduction
The DDI602 Outdoor Dual PIR Detector is an outdoor motion
detector and alarm trigger that uses two independent passive
infrared detectors plus a microwave sensor module.
All three sensors must trigger to cause the detector to signal
an alarm. The DDI602U-F1 uses triple detection technology to
deliver precise, reliable presence detection. It is designed for
use in CCTV and intruder alarm systems.
Programmable options include a variable pulse count and a
choice of three detection ranges: 10 m / 33 ft., 18 m / 59 ft.,
and 25 m / 82 ft.
The integral dual-axis tilt sensor allows 180
° of pan and 90° of
tilt. This increases the speed of the outdoor installation and
provides incredibly accurate aiming of the detection pattern.
The electronics module is acrylic coated for additional
component stability. It is encased in a vandal-resistant, high-
impact, UV stabilized plastic housing with an opaque
polyethylene front cover ensuring that the sensor is impervious
to and unaffected by weather conditions.
The combination of precision electronics, digital white light
filtering, and double shielding eliminate false alarms from the
sun and other visible light sources.
The DDI602U-F1 design has a neat and professional
appearance that gives no visible indication of the orientation of
the detector head and totally hides the wiring.
Quick installation
1. Mount and connect the detector following the instructions
given later in this sheet.
2. Apply supply voltage to the unit.
The detection LED (blue) flashes three times.
3. Wait approximately 2 to 3 minutes to allow the detector to
settle.
4. Press the programming button once to activate walk test
mode.
The detection LED is now enabled for five minutes.
Note:
The front cover must be fitted when walk testing.
The default settings are:
•
Range: 25 meters / 82 feet
•
Pulse count: 1
•
Detection LED: off
Mounting the unit
During installation, protect the electronics against water, as
trapped moisture can affect or damage the unit.
We recommend that the cable entry and screw mounting holes
are sealed from within the detector using acrylic (
non
-silicone
based) sealants.
Note:
When locating the detector, please ensure the detector
field of view is unobstructed.
To mount the detector:
1. Drill the wall to accept the two fixing screws, the cable
entry, and the tamper cup (if used). See Figures 1 and 3.
(2)
EOL
ALARM
N/C
TAMPER
N/C
ALARM
N/O
+
12V DC
-
STANDBY
CURRENT
DI601 = 7MA
DDI602 = 11MA
PROGRAM
( )
1
(1) (2) (3) (4)
