EN
www.uniteck.fr
19/34
TROUBLESHOOTING
UNICHARGE 1,5.12
Error message
Causes
Solution
The POWER light is ON but the charge
does not start (the Charge LED is
switched off)
The battery is charged.
The “floating” mode is
activated. The current is <
30mA, the LED indicator thus
does not switch on.
Normal situation. The charger
will go back to its charge
when the voltage drops. The
LED indicator will then
become orange again.
The battery voltage selected
is not appropriate (12V
selected instead of 6V)
Select the correct battery
voltage.
Polarity reversal on the
battery
Check the wiring.
The Charge LED flashes
(orange/green alternatively)
Critical charging status
The light will not flash more
than 5 seconds: the LED
indicator will then become
orange, meaning that the
battery is charging.
