Unitech TASHI MT180, Руководство пользователя

Страница: 49 / 52

Chapter 4 Advanced Setting
43
28. Click Apply , and then Send to send the command to controller immediately.
29. Click OK to return to the Permit Management window.
Scenario I - Normal Entrance and Exit
While in standby status, swipe your card on the internal eader. Message
“Entrance” with the user name (APB in this case) displays on the standby
screen indicating re-entering is not allowed.
Swipe your card on the external reader, message “Exit” with the user name
(APB in this case) displays on the standby screen indicating re-exiting is not
allowed.
Scenario II - Re-Entering
Swipe your card on the internal reader, message “Entrance” with the user
name (APB in this case) displays on the standby screen.
Swipe your card again on the internal reader, message “Re-Entering” with
the user name (APB in this case) displays on the standby screen indicating
re-entering occurs.
Scenario III - Re-Exiting
Swipe your card on the external reader, message “Exit” with the user name
(APB in this case) displays on the standby screen.
Unitech
APB
Entrance
2009.1.8 Thur.
Unitech
APB
Exit
2009.1.8 Thur.
Unitech
APB
Entrance
2009.1.8 Thur.
Unitech
APB
Re-Entering
2009.1.8 Thur.
Unitech
APB
Exit
2009.1.8 Thur.