Unitech TASHI MT180, Руководство пользователя

Страница: 19 / 52

Chapter 3 On-Screen Setting
13
Enter the Long Time Door option. You can enable/ disable the door open for a long period. Whether
you select Turn on or Turn off , you have to follow the on-screen prompt to swipe your card before this
setting is activated and the screen displays “Auto-opening door turn on/ off”.
Advanced Settings
Press F1 button to enter the terminal menu.
Press F3 button to select the Advanced option.
Press F5 button to enter the Advanced option.
Using the numeric keypad to enter the default system login password
12345678, and then press
F5 button to confirm. There are ten options avail-
able as follow.
• Set Device ID
• Set Baudrate
• Set Language
• Set Backlight
• Set Network
• Voice Park
• Reboot
• Resume Default
• Anti-theft
• Exit
Enter the Set Device ID option. You can specify the terminal ID, 001, by default.
Enter the Set Baudrate option. You can select a baud rate, 115200 bps by default, to match the con-
nected computer. Available rates are 9600, 19200, 38400, and 115200 bps.
Enter the Set Language option. You can switch the terminal language. Current languages supported
are English, Simplified Chinese, and Traditional Chinese.
Enter the Set Backlight option. You can set the backlight behavior. Select Always turn on , if you want
the backlight to stay on all the time. Select Always turn off , if you want the backlight to go off all the
time. Select Turn on onwork , if you want to the backlight to turn on when a button is pressed.
Enter the Set Network option. You can configure the network settings.
Set Network Description
Set Net Password Prompts you to enter the network password.
Set IP Address Prompts you to enter the IP address, 192.168.2.127, by default.
Set Net Mask Prompts you to enter the network mask, 255.255.255.0, by default.
Set Gateway Prompts you to configure the network gateway.
Set Port Number Prompts you to specify a local port number, 10002, by default. The
maximum valid port number is 65535.
Set Baud Rate Allows you to select a serial port baud rate, 115200 bps, by default.
Available rates are 9600, 19200, 38400, 57600, and 115200 bps.
Confirm Setting Select Yes to confirm the network settings. The screen displays “Modify
network success!”.
Select
No to go back to Set Network options.
>OperationSel<
X General
>> Advanced