45
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
MS925HC User’s Manual
3.13 EAN-8
EAN-8
Add on Supplement
ENABLE*
+5 On
DISABLE
+5 Off*
Lead Digit Send*
+2 On
Lead Digit No Send
+2 Off*
Check Digit Send *
Add a Space On
Check Digit No Send
Add a Space Off*
Addenda Required On*
Addenda Required Off
Note:
If ADDENDA REQUIRED is set to ON, the
scanner will only read an EAN-8 bar code that
has an addenda. At the same time please also
scan +5 ON or +2 ON so the scanner will
output a 5-digit or 2-digit addendum.
