Unitech MS925HC, Руководство пользователя

Страница: 40 / 114

23
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
MS925HC User’s Manual
2.11 Data Format, Date & Time Setup
2.11.1 Data Format
The default Data Format is <Date>, <Time>, <Barcode Data>
below are items and their setup codes:
Data Format
Example:
To change Data Format to
<Barcode Data>, <Date>, <Time>
1. Scan [Data Format]
2. Scan [4], [2], [3] on
Appendix A .
3. Scan [Data Format]
Field Separator
Default is comma ( , ) . You may replace it with any alphanumeric
characters from the full ASCII table.
Example:
To change Field Separator to Semicolon ( ; )
1. Scan [Field Separator]
2. Scan [ ; ] from the full ASCII table on
Appendix A .
3. Scan [Field Separator]