The H.T. Hackney Co.
Scanner Programming Guides
Revised: 06/23/2015
O:\hthackney\DOCUMENTATION\Scanner Guidelines.docx
Page
2
of
6
Programming - Unitech MS912 (Bluetooth)
1.
Reset to factory Defaults.
2.
Set Profile to HID.
3.
Enable iOS Hotkey. You will be able to double click the trigger to enable/disable the keyboard.
4.
Enable the MSI bar code.
5.
Expand UPC-E bar code to UPC-A bar code.
6.
Add the ‘#’ character to the end of each scan (Very Important).
7.
Set “Power Off” to 15 minutes
8.
Pair/Connect the scanner with your device (name is ‘Wireless Scanner’).
