Unitech MS851 страница 40 Скачать руководство пользователя

Страница: 40 / 92

- 24 -

unitech is a registered trademark of unitech Electronics Co., Ltd.

MS851 User’s Manual

3.1.8 Decode UPC/EAN Supplementals

Supplementals are bar codes appended according to specific format

conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). The following options are

available:

•

If you select

Ignore UPC/EAN with Supplementals

, and the scanner

is presented with a UPC/EAN plus supplemental symbol, the scanner

decodes UPC/EAN and ignores the supplemental characters.

•

If you select

Decode UPC/EAN with Supplementals

, the scanner

only decodes UPC/EAN symbols with supplemental characters, and

ignores symbols without supplementals.

•

If you select

Autodiscriminate UPC/EAN Supplementals

, the

scanner decodes UPC/EAN symbols with supplemental characters

immediately. If the symbol does not have a supplemental, the scanner

must decode the bar code the number of times set via

Decode

UPC/EAN Supplemental Redundancy

before transmitting its data to

confirm that there is no supplemental.

•

If you select one of the following

Supplemental Mode

options, the

scanner immediately transmits EAN-13 bar codes starting with that

prefix that have supplemental characters. If the symbol does not have

a supplemental, the scanner must decode the bar code the number of

times set via

Decode UPC/EAN Supplemental Redundancy

before

transmitting its data to confirm that there is no supplemental. The

scanner transmits UPC/EAN bar codes that do not have that prefix

immediately.

•

Enable 378/379 Supplemental Mode.

•

Enable 978/979 Supplemental Mode.

NOTE

If you select 978/979 Supplemental Mode and are scanning Bookland EAN
bar codes, see

Enable/Disable Bookland EAN

to enable Bookland EAN, and

select a format using

Bookland ISBN Format

•

Enable 977 Supplemental Mode.

•

Enable 414/419/434/439 Supplemental Mode.

•

Enable 491 Supplemental Mode.

•

Enable Smart Supplemental Mode

- applies to EAN-13 bar

codes starting with any prefix listed previously.

Содержание MS851





























































































Результаты поиска

Содержание MS851

Отзывы:

Похожие инструкции для MS851

Бренды по названию

Популярные бренды

Unitech MS851, Руководство пользователя

Результаты поиска

Содержание MS851

Отзывы:

Похожие инструкции для MS851

Бренды по названию

Популярные бренды