Unitech MS842HP страница 4 Скачать руководство пользователя | Manualshive

Страница: 4 / 101

background image

ii

Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

Regulatory Compliance Statements

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference with radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference with radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment and receiver.

–

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

–

Consult the dealer or an experienced radio/TV technician for help.

1. This Transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

2. This equipment complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment. To maintain compliance with FCC RF exposure requirements,
avoid direct contact to the transmitting antenna during transmitting.

3. Any changes or modifications (including the antennas) made to this device that are not

expressly approved by the manufacturer may void the user’s authority to operate the
equipment.

FCC Label Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause

undesired operation.

RF Radiation Exposure Statement

For body contact during operation, this scanner has been tested and meets FCC RF exposure
guidelines when used with an accessory that contains no metal and that positions the handset
a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with
FCC RF exposure guidelines.

Canadian Compliance Statement

This Class B Digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material
broilleur du Canada.

«
...
2
3
4
5
6
...
»

Содержание MS842HP






































































































Отзывы:

Нет отзывов

Похожие инструкции для MS842HP

Бренд: Datalogic Страницы: 5

FlashMover 8-in-1 USB

Бренд: Microdia Страницы: 4

Бренд: Canmax Страницы: 240

Бренд: Intermec Страницы: 3

Бренд: Element Страницы: 120

Бренд: Addonics Technologies Страницы: 1

Бренд: Anker Страницы: 14

Бренд: Hama Страницы: 24

Бренд: Bosch Страницы: 2

Бренд: TrekStor Страницы: 29

Бренд: Champtek Страницы: 79

Бренд: Hand Held Products Страницы: 2

Бренд: TSC Страницы: 85

Libre color AEBK07FS

Бренд: Aluratek Страницы: 23

Бренд: Rosslare Страницы: 50

Media X-Change 2.0

Бренд: Kanguru Страницы: 17

Бренд: Steren Страницы: 32

Бренд: Cub Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды