Unitech MS839, Руководство пользователя

Страница: 20 / 64

14
Most settings require only a single bar code, but a few need several different bar
codes to be scanned in order to completely define a setting. They are:
Double Verification:
Step 1: Scan Double Verification from Group 5
Step 2: Scan one digit
Step 3: Scan Double Verification
Min Length / Max Length
Step 1: Scan MIN LENGTH or MAX LENGTH.
Step 2: Scan two digits from Appendix E.
Step 3: Scan MIN LENGTH or MAX LENGTH.
NOTES:
1. If you hear three times of beeps, please re-operate.
2. If you operate improperly, reset the scanner and re-scan.
Barcode Length Setting
The following example illustrates how to set Code 39 with a minimum length
of 5 and a maximum length of 20:
Scan "Enter Group 7"
Scan "Fl" to select Code 39
Scan "MIN LENGTH" to enter minimum length setting
Scan "0 " and "5" to select length 5. (Appendix E)
Scan -MIN LENGTH" to end minimum length setting
Scan "MAX LENGTH" to enter maximum length setting
Scan "2" and "0" to select length 20. (Appendix E)
Scan "MAX LENGTH" to end maximum Length Setting
Scan "Exit" to end setup