- QUICK START GUIDE-
CONNECT
2.
- Download the Unistellar app from the Google Play Store
or Apple Store.
- Turn on your smartphone’s Wi-Fi.
- Check available Wi-Fi networks.
- Connect your smartphone to the eVscope Wi-Fi network
named eVscope-abcdef (the network’s name consists of
eVscope and six random characters).
- Launch the Unistellar app on your smartphone.
Warning: If your app is not behaving properly (for example,
joystick not working anymore), do not hesitate to relaunch
it. If you use iOS, please disable Auto-Lock (in Settings >
Display & Brightness), which may freeze your app.
1.
ON
INSTALL
Set up the tripod
- Open the legs of the tripod
and adjust the device to the
height that works best for
you.
- Move the bubble level to the
middle of the black circle by
adjusting the legs
Note: each time you move
your eVscope, we recommend
resetting the bubble level
Requirements
- Avoid directly exposing the eVscope to wind.
- Use the eVscope on stable ground.
- Use the eVscope under a clear sky.
- Locate the eVscope away from direct streetlight.
- For better results, avoid a full moon.
Install your eVscope
- Loosen the tripod screws. Install your eVscope vertically on
the tripod, then tighten the screws.
- Start the eVscope by pressing the ON button for one second.
A red light means the eVscope is ready.
- Remove the dust caps from the top of the tube and the
eyepiece
FOCUS & TRACK
3.
- Advanced focus (optional): Check the technical guide or the
online FAQ to learn how to use the Bahtinov mask embedded
in the dust cap.
Get the right focus
- Using the in-app joystick, lower the telescope slightly.
- Focus: Adjust the focusing wheel at the bottom of your
eVscope to align the visual cue with the top screw.
