User Manual
May 2021
©Unique Perspectives
www.click2go.ie
Page 11 of 14
7
Safety and Misuse Warnings
Do not install, maintain or operate the Point-It ! without reading, understanding
and following the proper instructions and manuals, otherwise injury or damage
may result.
Do not operate the Point-It ! if it behaves erratically, or shows abnormal
response, heating, smoke or arcing. Turn the unit off, disconnect all cables,
disconnect the battery, if fitted, and consult your service agent.
Ensure the Point-It ! is turned off when not in use and never leave the Point-It !
and associated PC or MAC switched on or plugged into the mains unattended or
overnight.
No connector pins should be touched, as contamination or damage due to
electrostatic discharge may result.
Point-It is not designed to resist water penetration. If a spillage occurs Turn the
unit off, disconnect all cables, and consult your service agent. Once turned off
any spillage over the Point-It ! should be wiped dry without delay. The Point-It !
may not be used outdoors.
Most electronic equipment is influenced by Radio Frequency Interference (RFI).
Caution should be exercised with regard to the use of portable communications
equipment in the area around such equipment. While the manufacturer has made
every effort to ensure that RFI does not cause problems, very strong signals
could still cause a problem.
Report any malfunctions immediately to your Service Agent.