COPYRIGHT 2016, UNIQUE AUTOMATION
- 7 -
08/11/2016 12:57
Hand Shower
bathomatic with hand shower allows a hand or overhead shower to be controlled
from the BUI. Pressing the
button will display a hand shower icon with
temperature and flow bars.
To start the shower with the temperature and flow displayed press and hold .
To increase/decrease the water temperature use
/
and to increase/decrease
the flow use / .
To turn the shower off press and the shower stops.
Exit by pressing the button. After 3 seconds of inactivity the BUI will display the
bathomatic status leaving the hand shower
Non active
Active
Drain Operation
Closing the drain
BUI has a dedicate drain button. When the bath is empty and the drain is open
pressing the
button will prompt a message “CLOSE DRAIN?” and to do this you
need to press the button.
Opening the drain
When the bath drain is closed with an empty bath or one containing water the
pressing of the button will prompt a message
“OPEN DRAIN?”/“EMPTY BATH?”
and to do this you need to press the
button. If there is water in the bath a
“DRAINING” message will appear
When bathomatic is filing
→ pressing of the button will prompt a message “STOP
FILLING?”, pressing the button will pause bathomatic and message “EMPTY
BATH?” will show. Pressing again will open the drain and “DRAINING” will
appear.
