24
3
Setting Procedures
24
Setting Procedures
Chapter
3
Setting protection
The lock to prevent rewriting can be set to each category of
the setting values.
Since this setting change is sent to the TM200 immediately,
there are no buttons like "Set".
<Setting value>
OFF
Setting values are rewritable.
ON
Setting values are not rewritable.
Self check
"Self Check" button
Self-check is a function to check the memory of the TM200 main unit
automatically and to detect errors.
It is also a function that performs checksum of software, operation check
of NOVRAM and RAM, and check of lamp lighting. This function does
not diagnose the analog circuit.
When the "Self Check" button is clicked, operation of the TM200 is
checked, and the software version of the TM200, checksum and results
are displayed.
During self-check, the STATUS lamp (green) and POWER/ALM lamp (red) all light off
→
light on
(green)
→
light on (red)
→
all light on. Once the self-check is complete, the display returns to
normal.
If the check is complete normally, "PASS" is displayed in the result.
If an error is detected in the TM200, "NGXX" is displayed in the result. (XX represents a 2-digit
number.)
Caution
●
If "NGXX" is displayed, it may be a sign of failure. (XX represents a 2-digit number.)
Contact one of our sales representatives.
Refer to P.43 "7-1.List of setting values" for setting items prohibited to be
rewritten in the setting protection.
Key points