Unipulse M525B, Руководство по эксплуатации

Страница: 44 / 85

35
4 FOR GREATER USE OF THE PRINTER
35
FOR GREATER USE OF THE PRINTER
Chapter
4
Set the number of lines for feeding paper after Print Every, ST (sub total print) and GT (grand total print).
Meaning of setting
Immediately after every printing, the printed data cannot be checked because the paper has not
yet been ejected from the ejection slot. Set 3 - 4 lines for visually checking every piece of
printed data.
Select a method for selecting codes.
Details of setting
Keyboard Code names can be selected with the keys on the front panel.
Option Code names can be selected through RS-232C interface or BCD input
(option).
Key table Codes can be selected with the keys on the front panel.
Option table Codes can be selected through the RS-232C interface or BCD input
(option).
Name of setting 21: Feed Lines
Setting range 0 - 9 (lines)
Initial value 0
Caution
Paper is fed by the number of lines set under [Feed Lines] after Print Every, ST,
GT, BT, Sample Print and Test Print. Paper is always fed by one line with the
(FEED) key.
Name of setting 22: Code Selection Method
Selection item
Caution
If Keyboard/Option is selected, code names can be selected. If Key Table/
Option Table is selected, codes can be selected from code tables.
21: Feed Lines
Example of printing DATE 2000/07/01 13:30
--- GRAND TOTAL Ach ---
3 100.15kg
2 100.18kg
1 100.21kg
Feed lines
22: Code Selection Method
Setting Ach Bch
0
(initial value)
Key Board Key Board
1 Option Key Board
2 Key Table Key Table
3 Option Table Key Table