Unipulse M252A, Руководство по эксплуатации

Страница: 70 / 101

6. Advanced use
59
Code table registration performance
Code table registration is almost the same as the abovementioned [Code name registration
performance] except for inputting table numbers corresponding to code names at the beginning.
The basic operating procedures actually for setting the M252A are described below. Here, the code
table number "01" and code name "NOPQR" are registered on Ach as an example.
1.
Select “2. Key Table” or “3. Option Table” under [22: Code Selection
Method].
2.
Set “2 digits” under [23: Number of Code Digits Designation].
3.
Referring to "4. For greater use of the printer" (page 19), enter [24: Code
Table Registration Ach] in the setting mode.
4.
Since the following is printed, input the code table number in a 2-digit
number.
End --> ESC
Next --> Number-ENT
Input --> ENT
24:Code Table Ach
==========================
>> Next is 24
To enter code table registration:
operating
To make other settings:
To cancel or end:
For code table registration, press [ENT].
[ENT]
[Setting no.]
→
[ENT]
[ESC]
00 to 31 - ENT
>> Input table number
Here, press [01] → [ENT].
operating