Unipulse F805AT-BC, Руководство по эксплуатации

Страница: 88 / 202

6.SETTING AND ADJUSTMENT OF READING
73
6-5-16. Ch1/Ch2/Ch3 start point
Use this menu item to define Y-axis starting points for graphic display of each channel.
Note that the value for Ch1 is also used for the single screen display (e.g. “NO SPLIT”
is selected in [SPLIT SELECTION]).
Operation
6-5-17. Ch1/Ch2/Ch3 end point
Use this menu item to define Y-axis end points for graphic display of each channel. The
value for Ch1 is also used for non-split display.
Operation
6-5-18. X end point
Use this menu item to define the X-axis full-scale for graphic display.
* Setting X End Point to 1.2 second, for example, a dot in x-direction represents a time
span of 5 msec, enabling a graph corresponding to about 200 A/D conversions per
second.
Operation
Range: 0 – 99998 (5 digits, decimal place floating)
MODE GRAPH SETTING
→ →
PAGE×2 CH1 START POINT
→
MODE GRAPH SETTING
→ →
PAGE×2 CH2 START POINT
→
MODE GRAPH SETTING
→ →
PAGE×2 CH3 START POINT
→
Range: 1 – 99999 (5 digits, decimal place floating)
MODE GRAPH SETTING → → PAGE×2 CH1 END POINT →
MODE GRAPH SETTING → → PAGE×2 CH2 END POINT →
MODE GRAPH SETTING → → PAGE×2 CH3 END POINT →
Range: 1.2– 99.9 sec (3 digits, decimal place fixed)
MODE GRAPH SETTING → → PAGE×2 X END POINT →