Unipulse F701-P, Руководство по эксплуатации

Страница: 41 / 116

30
4 CALIBRATION
30
C
A
LIB
R
A
TIO
N
Chapter
4
4-5.
Span calibration (setting mode 9-1)
Put a balance weight on the load cell (scale), and register the span (gain).
- Put a balance weight of the weight set by balance weight value on the load cell (scale).
(Calibration with a balance weight of 50% or more of the capacity is advantageous in terms of
linearity, etc.)
- Check for unwanted loads as in the case of zero calibration.
- Check that " " is on.
(When the indicated value is not stable, accurate calibration cannot be performed.)
1.
Select setting mode 9-1 (span calibration).
2.
Perform span calibration.
3.
Span calibration ends with the weight value display equal to the balance weight
value.
* If an error message is displayed, see "11-2.Over scale/error display" on page 100.
kg
Display of span calibration in progress.
Press the key and start the registration of balance weight value.
Upon completion of input, fix it with the key.
kg
Weight value Setting mode No.